Hello List!
I already talked about, that I do like to have a technology definition file, just for reading into the (Magic) Layout editor and get ready to work with. TOML (https://github.com/toml-lang/toml) is doing the job quite well.
So I wrote now the very first process definition file I like to share with you. Please check the attachment of this email.
As you can see there are definitions for every layer we are currently using - please check this twice, so we do not miss anything. Annotated to every layer are the GDS II (https://en.wikipedia.org/wiki/GDSII) layer numbers and the CIF (https://en.wikipedia.org/wiki/Caltech_Intermediate_Form) layer names. My informations came from the MOSIS SCMOS-Design Rules document (https://www.mosis.com/files/scmos/scmos.pdf) we like to use for our technology also.
And, well, I hope I get fancy colors for every layer. If you like to look at such color definitions, I would recommend you the latexlolor.com website.
Later we should feed the ls1u.toml file with specific technology values like resistance and so on - might be also with the design rules numbers (as seen in the SCMOS document from MOSIS above), e.g. Rule 15.1 with 6 lambda.
Regards, Hagen.
Hi Hagen Thanks for that fantastic work! I now start working on reading this file in as our standard technology! Stay tuned!
On Sunday, 18 March 2018 11:53:17 PM HKT Hagen SANKOWSKI wrote:
Hello List!
I already talked about, that I do like to have a technology definition file, just for reading into the (Magic) Layout editor and get ready to work with. TOML (https://github.com/toml-lang/toml) is doing the job quite well.
So I wrote now the very first process definition file I like to share with you. Please check the attachment of this email.
As you can see there are definitions for every layer we are currently using - please check this twice, so we do not miss anything. Annotated to every layer are the GDS II (https://en.wikipedia.org/wiki/GDSII) layer numbers and the CIF (https://en.wikipedia.org/wiki/Caltech_Intermediate_Form) layer names. My informations came from the MOSIS SCMOS-Design Rules document (https://www.mosis.com/files/scmos/scmos.pdf) we like to use for our technology also.
And, well, I hope I get fancy colors for every layer. If you like to look at such color definitions, I would recommend you the latexlolor.com website.
Later we should feed the ls1u.toml file with specific technology values like resistance and so on - might be also with the design rules numbers (as seen in the SCMOS document from MOSIS above), e.g. Rule 15.1 with 6 lambda.
Regards, Hagen.
Hi I'm now testing out multiple of these C++ implementations of TOML out there. As soon as the code runs reliably I will push it.
Cheers David
On Sunday, 18 March 2018 11:58:48 PM HKT David Lanzendörfer wrote:
Hi Hagen Thanks for that fantastic work! I now start working on reading this file in as our standard technology! Stay tuned!
On Sunday, 18 March 2018 11:53:17 PM HKT Hagen SANKOWSKI wrote:
Hello List!
I already talked about, that I do like to have a technology definition file, just for reading into the (Magic) Layout editor and get ready to work with. TOML (https://github.com/toml-lang/toml) is doing the job quite well.
So I wrote now the very first process definition file I like to share with you. Please check the attachment of this email.
As you can see there are definitions for every layer we are currently using - please check this twice, so we do not miss anything. Annotated to every layer are the GDS II (https://en.wikipedia.org/wiki/GDSII) layer numbers and the CIF (https://en.wikipedia.org/wiki/Caltech_Intermediate_Form) layer names. My informations came from the MOSIS SCMOS-Design Rules document (https://www.mosis.com/files/scmos/scmos.pdf) we like to use for our technology also.
And, well, I hope I get fancy colors for every layer. If you like to look at such color definitions, I would recommend you the latexlolor.com website.
Later we should feed the ls1u.toml file with specific technology values like resistance and so on - might be also with the design rules numbers (as seen in the SCMOS document from MOSIS above), e.g. Rule 15.1 with 6 lambda.
Regards, Hagen.
libresilicon-developers@list.libresilicon.com
-
David Lanzendörfer -
Hagen SANKOWSKI