June 2018 - Libresilicon-developers

GPU/SoC
by David Lanzendörfer 30 Jun '18

30 Jun '18

Hi I'm now so far that it fetches the setup instructions from the boot ROM. Next step is getting it to boot from the SD card image provided by the SD card behavioral model. When I get this to work, I can use dd to make a bootable SD card and the ROM loader is anyway hard wired. With the DRAM Luke has suggested I see a bright future again for our own 100% libre SoC. As soon as I've got something that works and have fixed all the bugs (which I'd be ashamed of to mirror for all eternity on GitHub ^^') I will push it. @Hagen: I still haven't heard back from HKUST BTW Cheers David

1 0

SoC for GPU project
by David Lanzendörfer 29 Jun '18

29 Jun '18

Hi I've now started wiring a RISC-V CPU generated with Rocket-Chip into a top level: https://github.com/leviathanch/SauMauPing1 However, for some reason it doesn't start trying to fetch instructions. I'll investigate tomorrow, for now I expect it to rain cats and dogs tonight and tomorrow as much as my head hurts right now. I'll relax now and get back tomorrow with lots of coffee. Another important topic which came up when I tried to repurpose the memory controller from the North Point project: We will have to develop SRAM for our MCU or solder an external SRAM chip onto the board... like this one: https://github.com/freecores/zbt_sram_controller/blob/master/ZBTSRAM61NLP_N… Didn't we have a talk some while ago with one of the folks from OpenRAM? That's exactly their department. We should tell them to be ready to get started dimensioning SRAM cells, as soon as we've got the first workable results from PearlRiver. Cheers David PS: Turned spell checker off now ^^

4 15

Re: [Libre-silicon-devel] SoC for GPU project
by Mohammad Amin Nili 27 Jun '18

27 Jun '18

Hi all, After some works with Luke, we managed to create a feature/criteria list of the GPU. So if your GPU IP Core could pass these requirements you’ll choose for the $250,000 USD sponsorship. It is possible that the list change during the time so stay-tuned. However the main requirements (performance, power consumption and license type) won’t change. Here is the link: http://libre-riscv.org/shakti/m_class/libre_3d_gpu/ <http://libre-riscv.org/shakti/m_class/libre_3d_gpu/> Best regards, Manili P.S. Luke please correct me if I’m missing something.

2 5

Results from yesterdays Mumble meeting
by David Lanzendörfer 27 Jun '18

27 Jun '18

Hi all Here's the results from yesterdays Mumble conference: We've decided that we will provide a collection of different example process documentations for different sets of machines available. For instance there will be a guide which helps someone to set up the process with only a diffusion furnace and wet etcher. But there will also be another guide for setting the process up with an ion implanter and more advanced equipment. Also we've decided that we will try to apply for this sponsorship from an anonymous sponsor which promised 250kUSD to someone who might develop a truly free GPU. (IMHO: Since we're the only ones working on a free manufacturing process, we're basically the only ones who could be chosen for that sponsorship, if they really would care about the meaning of truly Libre) Anyway... Manili (Mohammad Amin) joined the devteam yesterday and will help with developing the GPU of which we will show a prototype hopefully soon to this anonymous sponsor. @Manili: What SD card controller should we be using for our test SoC? This one maybe? (I've already written a RISC-V-Wishbone converter a while ago for the North Point MCU, which we could use): https://github.com/mczerski/SD-card-controller https://opencores.org/project/sd_card_controller Cheers David

5 36

Status report #ImpostorSyndromePrevention
by David Lanzendörfer 26 Jun '18

26 Jun '18

Hi So, I've now started providing multiple separate process step docs for different degrees of equipment setup: https://github.com/libresilicon/process/tree/master/process_steps Also I've managed to automatically generate a core with SPI and DRAM controller and have to further work on it tomorrow (as well as the process) in order to make it synthesizable in a stand-alone fashion on a die: https://github.com/libresilicon/SauMauPing1 Also I've updated the links on the website so that both new process docs can be found there. (Table follows) @Hagen: I didn't have time to further work on QtFlow... But didn't we get like 6 new developers anyway at the last Hackathon? Can't they... well... take care of that? I've got only so many parallel threads available in my head before the overheat protection kicks in and it shuts down and needs to be rebooted ;-) Cheers -lev

1 0

KLayout and QtFlow
by David Lanzendörfer 24 Jun '18

24 Jun '18

Hi list I've been looking through KLayout and they have some stuff implemented in a much more performant fashion than I did. The question is: Do we wanna drag in their code into QtFlow or maybe integrate our stuff as plugin into KLayout? Please give feedback on that. Also please have a look on the process, which I think is plus-minus done so far and ready for testing: https://github.com/libresilicon/process/blob/master/process_steps/process_s… Please come into Mumble this Sunday 9pm HKT and give your feedback on the process! Thanks David

2 5

Next Mumble Session on June 24, 2018, 21.00 HKT
by David Lanzendörfer 23 Jun '18

23 Jun '18

Hello List! Just a small reminder for our next Mumble Sessions on this Sunday, June 24 at 21.00 Hong Kong Time. Please join us as usual at our Mumble Server with IP 109.109.202.102 at Port 64738, the Channel is IC. On the agenda are (at least) this topics - current status - hackathon outcome - test wafer structures - other stuff around libre silicon Happy to hear from you! David

1 0

Mumble meeting
by David Lanzendörfer 18 Jun '18

18 Jun '18

Hello list Today no one at all joined the mumble conference... Please come next Sunday 9pm HKT, so that we can do a status check and coordination in the team and make sure we're on track for our road map. Cheers David

2 2

Auto-placement with padframe constraint
by David Lanzendörfer 15 Jun '18

15 Jun '18

Hello list Another feature which is not present in qflow is auto place and route based on a predefined pad frame. We've got a pad frame generator/pin planner already in QtFlow but need to somehow teach our future new place-route engine how to deal with the fixed pin out provided by the pad frame. Someone at the hackathon is planning to write a better place-and-route engine as far as I remember. Please take that precondition capability into consideration. Thanks David

1 0

Reminder - next Mumble Session on June 3, 2018 21.00 HKT
by Hagen SANKOWSKI 13 Jun '18

13 Jun '18

Hello List! Just a small reminder for our next Mumble Sessions on this Sunday, June 3 at 21.00 Hong Kong Time. Please join us as usual at our Mumble Server with IP 109.109.202.102 at Port 64738, the Channel is IC. On the agenda are (at least) this topics - current status - test wafer structures - other stuff around libre silicon Happy to hear from you! Hagen

3 5